SOUND DETECT & SOUND DETECT PRO USER MANUAL
56
8-15-7 Device Information
See device informations as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the System icon.
3.
Tap the About icon. Information is shown on screen.
4.
Tap outside window to exit the display settings window. The main menu
closes automatically due to inactivity.
8-15-8 Device Software Upgrade
The device may periodical
ly need a software upgrade or patch. The upgrade
process takes about 15 minutes. Ensure the device is charged before upgrading.
If the device loses power during the upgrade it will need to be restarted.
1.
Contact customer service to receive the latest software upgrade or patch.
2.
Place the software update file provided by customer support in the root
directory of the memory card (i.e., not in any folder). Do not rename the file.
3.
Insert a memory card into the memory card slot of the device.
4.
Using the touchscreen, tap the Display Window to open the main menu.
5.
Tap the System icon.
6.
Tap the About icon.
7. Tap Update.
8.
Tap a package to select it.
9.
Tap OK to update. Tap Cancel to cancel update process.
8-15-6 Threshold
The system threshold is used to set the minimum sensitivity which limits the
heatmap energy show that is higher than the sensitivity value.
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the System icon.
3.
Tap the Tool icon.
4.
Toggle Switch next to Threshold to the On position by tapping the switch.
The switch turns blue when enabled. Disable the feature by tapping the
switch again. The switch turns gray when inactive.
5.
Press-and-hold on the slider; then, drag left or right to set a threshold.
6.
Tap outside window to exit the display settings window. The main menu
closes automatically due to inactivity.
