SOUND DETECT & SOUND DETECT PRO USER MANUAL
31
8-5-4 Review Media
8-5-4-1 View Images
Review images as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the Playback icon to open the gallery.
3.
Tap an image to review in full screen mode. Double tap to zoom in; then,
double tap again to zoom out. When enlarged, press-and-hold on the
touchscreen; then drag to pan the image.
4.
Press < or > to scroll through the gallery.
5.
Tap ←] repeatedly to exit the gallery.
8-5-2 Record a Video
Record a video as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the Photo/Video Mode icon to change between camera mode and video
mode. The icon in the upper right corner of the Display Window shows the
current media mode.
3.
Close the main menu by tapping the Display Window. Alternatively, wait a
few seconds and the menu closes automatically due to inactivity.
4.
Press the Capture button to begin recording a video. Press again to stop
recording. Videos automatically stop recording after 5 minutes. Saving
occurs automatically.
8-5-3 Record a Sound
By default any sound detected by the acoustic device is recorded when videos
are recorded. Sounds cannot be recorded by themselves.
Disable/enable sound recording as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the Acoustic icon. A window appears.
3.
Toggle Record on Video-shooting to the OFF position by tapping the switch.
The switch turns gray when inactive. Enable sound recording by tapping
the switch again. The switch turns blue when active.
4.
Tap the Display Window to close the window.
5.
Press the Capture button to begin recording a video. Press again to stop
recording. Videos automatically stop recording after 5 minutes. Saving
occurs automatically.
