Setup Menu
37
AUDIO SETUP
This sub-menu can only be set when this
device stops playback.
DOWNMIX
Set this function when output audio signal
via the Composite connectors:
LT/RT :
Outputs the left or right
channel to both channels.
Stereo : Outputs stereo audio.
SPDIF OUTPUT
Outputs the digital audio signal via the Coaxial digital audio connector. After enabling this
function, the Composite connector will not output the audio signal.
OFF :
Outputs audio via Composite, and disables the digital audio output.
SPDIF/RAW :
Outputs the digital audio without decoding. See “PRO LOGIC.”
SPDIF/PCM :
Converts the multi-channel audio signal into stereo for output. See “LPCM
OUTPUT.”
PRO LOGIC
This function only works if you have selected “SPDIF/RAW”.
If the movie contains PCM stereo sound, after enabling this function and connected to an AV
amplifier (receiver) equipped with a digital audio decoder, the audio output will be simulated
as multi-channel sound.
OFF :
No multi channels simulation.
ON :
Outputs audio signal with multi channels simulation.
AUTO :
Outputs audio signal with multi channels simulation whenever possible.
LPCM OUTPUT
This function only works if you have selected “SPDIF/PCM”.
LPCM stands for Linear Pulse Code Modulation, which is a common method for encoding
audio signal in CD and DVD. Higher sampling rate means audio output with more detail to
meet Hi-end audiophile equipment requirements.
LPCM 48K : The sampling rate of the digital audio output will be limited at 48KHz.
LPCM 96K : The sampling rate of the digital audio output will be limited at 96KHz.
