several PCs. Connect the ADSL modem to the WAN port of the
router and after a few seconds the WAN LED will light up.
You can now connect the PCs. Once the PCs have been
started up, the relevant LED will light up.
H A R D W A R E I N S TA L L AT I O N
As soon as you have connected the router to the power
adapter, the power LED (Green) will light up and the link/act
LEDs will fl ash once. The other LEDs (Green) will light up as
soon as one of the UTP ports are connected to the computer.
When data is transferred from one computer to another the
LEDs will start to fl ash.
LED INDICATORS
OVERVIEW OF CONNECTIONS AT THE BACK OF THE ROUTER
Name LED
Action
Description
OFF
No
Power
ON
Power
ON
ON
Router is starting up
Flashing
Router is ready to use
OFF
Hardware Error (reset the router)
OFF
Wireless connection is disabled
Flashing
Wireless connection is enabled
OFF
There is no network connection between computer and router
ON
There is a network connection between computer and router
Flashing
There is data activity on the network
Flashing1
Wireless connection is enabled
Flashing2
Error
On
There is a network connection
PWR
SYS
WLAN
WAN, 1-4
WPS
7
6
