11
Using and Maintaining your Swift 5x
Step 3: Press and hold the number on the keypad that corresponds to the
tray you are disinfecting to start a disinfection cycle.
Step 4: Wait for the disinfection cycle to complete.
Step 5: Open the tray and remove the disinfected device.
Method 3: Disinfect multiple devices on the fly.
Step 1: Open any tray and place your device in the basket.
Step 2: Close the tray.
Step 3: Repeat steps 1 & 2 until all devices are in the unit.
Step 4: Press and hold the start button to disinfect all trays.
Step 5: The unit automatically locks when the disinfection cycle is in process. You
will not be able to open the trays or remove devices until the cycle completes.
Step 6: The cycle is complete when all the “DISINFECTING” lights are solid blue.
*All trays must be closed for the disinfection process to begin.
**Press the stop button if you need to interrupt the disinfection cycle.
