Package Contents/Tools Required
Specifications
Electrical rating:
• 24 VAC (18-30 VAC)
• DC Power: 3.0 VDC (2 “AA” batteries included)
• 1 amp maximum per terminal
• 4 amp maximum total load
Temperature control range:
45°F to 90°F (7°C to 32°C)
Accuracy:
± 1°F (± 0.5°C)
System configurations:
3-stage heat, 2-stage cool heat pump
Timing:
Anti-short Cycle: 5 minutes
Backlight Operation: Battery for 5 seconds, hardwired for 10 seconds
Terminations:
C, L, R, B, O, W2, G, E, Y1, Y2, W3
Important Safety Information
WARNING!
:
Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
• This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
• All wiring must conform to local and national electrical and building codes
• Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
• Use this thermostat only as described in this manual
Package includes:
SimpleComfort
®
2210 thermostat on base, thermostat cover, wiring labels, screws and
wall anchors, Installation, Operation and Application Guide
Tools required for installation:
Drill with 3/16” bit, hammer, screwdriver
