Instruction Manual
CB400
To get a better view, please use this projector in a semi dark room.
Please use this projector carefully, dropping it may cause damage to parts, or result in
a blurred image or abnormal displaying.
INSTALLATION
POWER
CLEANING
High temperature attention
Warning tips
Be careful while using the power cord, avoid excessive bending. Damaging the power cable
may cause electric shock and fire.
It is better to unplug the power cord after powering off.
Unplug the power cable first.
Clean the shell regularly with a damp cloth, neutral detergent can be used.
Please use a glasses cloth or lens paper, not to scratch the lens.
Please clean projector’s vents and speakers regularly by banister brush, or the vents will be blocked.
When you’ve finished using the projector the exhaust port may be very hot, be careful not to burn
yourself. While projecting, please do not look the lens directly as it may hurt your eyes.
Do not disassemble the projector, this may cause electric shock and voids the warranty.
Please do not put any liquids or weight on the projector.
To insure consistent heat exhaustion, please open the height bracket in the bottom before starting.
17.Safety Instruction
iCODIS
