• WEATHER (
WX
), ON or OFF
Push , then push
[4
WX-ALT
]
to turn
weather alert ON or OFF.
– If you are experiencing an interruption every
5 seconds, turn your weather alert OFF.
The “
WX
” symbol will disappear
from the screen.
• LOCK, ON or OFF
(4)
Push the KEY LOCK switch
[
]
to turn ON.
Push and hold switch 2 seconds to turn OFF.
• SCAN, ON or OFF
Push , then push
[2
SCAN
]
.
Push
[
Y
]
or
[
Z
]
to change the scan
direction.
To stop scan, push
[CLR]
. To resume,
push
[CLR]
,
,
[2
SCAN
]
.
Push
[MR
MW
]
to enter Memory mode
Push , then push
[2
SCAN
]
.
– To stop scanning, push
[CLR]
.
• CLEAR ALL
Push
[CLR]
twice.
PROGRAM FREQUENCIES INTO MEMORY
• SELECT THE DESIRED FREQUENCY
Push
[CLR]
, then select the desired frequency
by using the keypad.
Push
, then push
[MR
MW
]
to enter the
Memory Write mode.
– “
MCH
“
will blink at the top on screen.
Push
[
Y
]
or
[
Z
]
to select the channel to enter
the frequency.
Push
[ENT
SET
]
to save the frequency into
Memory channel.
• ENTER BANK SELECTION MODE & SELECT
A GROUP
Push the following to write a new bank:
,
[MR
MW
]
,
,
[3
GRP
]
then select Group
location and
[ENT
SET
]
.
Push
, then push
[3
GRP
]
.
Push
[
Y
]
or
[
Z
]
to select the group.
Push
[ENT
SET
]
to save.
• FINISH WRITING TO MEMORY
Now that the channel and bank have been
selected, push
[ENT
SET
]
to save and end.
• FIND FREQUENCY IN MEMORY
Push
[MR
MW
]
and push
[
Y
]
or
[
Z
]
to scroll
through the memory channels, pause at each
channel and the frequency will momentarily
appear.
TAG (SELECT SCAN) CHANNELS
TAG channels is Icom’s way of selecting
and deselecting channels to be scanned.
• TAG SETTING
Select whether or not to tag selected
channels for scanning.
Untagged channels are skipped during a
scan.
Push
[MR
MW
]
to enter the Memory mode.
Select a channel to tag or untag.
Push , then push
[9
TAG
]
to tag or
untag the channel.
is displayed if the channel is tagged.
• HOW TO DELETE CHANNELS IN MEMORY
Push
[MR
MW
]
to select Memory mode.
Push
[
Y
]
or
[
Z
]
to select a channel to
delete.
Push , and then push
[CLR]
.
“
DELETE?
” is then displayed.
Push
[ENT
SET
]
to delete the channel.
SIDE TONE FUNCTION
When using a third-party headset, the
transceiver outputs your transmitted voice
2
3
4
