New2001
28
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
The Memory mode is very useful to quickly select often-used
operating settings.
[Example]: Programming 433.600 MHz/FM mode into
memory channel 11 (a blank channel).
q
Push [V/MHz]
to select the
VFO mode.
w
Set a desired frequency and operat-
ing mode:
➥
Rotate [DIAL] to set a desired fre-
quency.
➥
Push [FM/DV]
one or more
times to select a desired operat-
ing mode.
➥
Set other data (e.g. duplex di
-
rection, frequency offset, tone
squelch, etc.), if desired.
e
Hold down [S.MW]
for 1 sec-
ond to enter the Select Memory write
mode.
• 1 short and 1 long beep sound.
• The
memory channel number blinks.
r
Rotate
[DIAL]
to select a desired
channel.
• Call channels (C0, C1), VFO and scan
edge channels (00A/00B to 24A/24B),
as well as regular memory channels,
can be programmed in this way.
t
Hold down [S.MW]
for 1 second
to program.
• 3 beeps sound.
• Before returning to the VFO mode, the
programmed memory contents are dis-
played for a moment.
• Memory channel number automati
-
cally increases when continuing to hold
down [S.MW]
for 1 second after
programming.
NOTE:
Push [CLR]
to cancel the program and exit
the Select Memory write mode before memory program-
ming is finished.
■
Memory channel programming
Blinks
Memory contents
is displayed for
a moment
After programming
is finished, return
to the VFO mode
Select Memory
write mode
Summary of Contents for D-STAR ID-31A; D-STAR ID-31E
Page 76: ...67 MEMO ...
Page 77: ...68 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 MEMO ...
Page 78: ...69 MEMO ...
