background image

New2001

43

6

MENU SCREEN OPERATION

New2001

DTMF/T-CALL

DTMF Memory

DTMF Speed

T-CALL, 

d0

:~d9:, dA:~dD:, d*: or d#:

In this item, set 

the DTMF Memory functions.

100ms

, 200ms, 300ms or 500ms

SPEECH

RX Call Sign SPEECH

RX>CS SPEECH

SPEECH Language

Alphabet

SPEECH Speed
SPEECH Level

OFF, 

ON (Kerchunk)

 or ON (All)

In this item, set 

the Speech functions.

OFF or 

ON

English

 or Japanese

Normal

 or Phonetic Code

Slow or 

Fast

0~

7

~9

 

Menu items and default settings (Continued)

NOTE:

 The default settings, shown below, are for the USA version.

The default settings may differ, depending on the version. 

DESCRIPTIONS

RANGE OR VALUE (Default is shown in bold)

Selects the RX call sign speech function 
option while ON or turns it OFF.
Turns the RX>CS Speech function ON 
or OFF.
Selects either English or Japanese as 
the desired speech language.
Selects  the  alphabet  character  an-
nouncement type.

Selects Slow or Fast speech speed
Sets a volume level for the voice synthe-
sizer.

Selects  a  DTMF  memory  channel  to 
transmit.

Selects the DTMF transfer speed.

Summary of Contents for D-STAR ID-31A; D-STAR ID-31E

















































































Reviews: