offered by Busse-Yachtshop.com
20
4
SET-UP
■
Offset time
Local time can be used when
the GPS position data is valid
and offset time is input.
q
Push [CALL], then push [
√
]
one or more times to select
‘Set-up’, then push [ENT].
w
Select ‘Offset time’, then
push [ENT].
e
Push “0; –” or “1; space”, then input the time differences.
r
Push [ENT] to determine the time or push [CLR] to exit the
Set-up menu.
■
Brightness
• Adjusting the brightness
q
Push [CALL], then push [
√
] one or more times to select
‘Set-up’, then push [ENT].
w
Select ‘Brightness’, then push [ENT].
e
Push [
Y
] or [
Z
] one or more times (or numeral keys in-
stead) to adjust the brightness.
• Brightness level indication; 1 (dark) to 8 (bright)
r
Push [ENT] to determine the brightness or push [CLR] to
exit the Set-up menu.
■
Contrast
• Adjusting the contrast
q
Push [CALL], then push [
√
] one or more times to select
‘Set-up’, then push [ENT].
w
Select ‘Contrast’, then push [ENT].
e
Push [
Y
] or [
Z
] one or more times (or numeral keys in-
stead) to adjust the contrast.
• Contrast level indication; 1 (low) to 8 (high)
r
Push [ENT] to determine the brightness or push [CLR] to
exit the Set-up menu.
■
MMSI check
Your ID code can be displayed via the set-up menu.
• Check your ID
q
Push [CALL], then push [
√
]
one or more times to select
‘Set-up’, then push [ENT].
w
Select ‘MMSI check’, then
push [ENT].
e
Your ID code shows on the
display.
r
Push [CLR] to exit the Set-up
menu.
<MMSI check>
267350012
<CLR
Exit>
<Offset time>
—09:30
<CLR
➝
Exit / ENT
➝
OK>
DS-100#02-(2) 01.12.13 10:53 AM Page 20 (1,1)
