INTRODUCTION
This service manual describes the latest service information
for the
HM-151
HAND MICROPHONE, at the time of
publication.
ORDERING PARTS
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit Icom part number
2. Component name and informations
3. Equipment model name and unit name
4. Quantity required
<
SAMPLE ORDER
>
8810009610 Screw FH M2.6
×
6 ZK
HM-151
Top cover 10
pieces
Addresses are provided on the inside back cover for your
convenience.
To upgrade quality, all electrical or mechanical parts and internal
circuits are subject to change without notice or obligation.
MODEL NAME
VERSION
HM-151
[GEN]
[GEN-02]
[GEN-01]
[EXP]
1. Make sure the problem is internal before disassembling
the speaker microphone.
2.
DO NOT
open the speaker microphone until the
transceiver is disconnected from its power source.
3.
DO NOT
force any of the variable components. Turn
them slowly and smoothly.
4.
DO NOT
short any circuits or electronic parts. An
insulated tuning tool
MUST
be used for all adjustments.
5.
DO NOT
keep power ON for a long time when the
speaker microphone is defective.
REPAIR NOTES
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
United Kingdom, Germany, France, Spain, Russia and/or other countries.