33
4
RECEIVE AND TRANSMIT
2001 NEW
2001 NEW
D
D
Keyer set mode
This set mode is used to set the CW side tone, mem-
ory keyer repeat time, dash weight, paddle specifica-
tions, keyer type, etc.
• Setting contents
q
Push [MENU] to select
M1
, then push [F4
KEY
] to
select the memory keyer menu.
w
Push [F5
SET
] to select keyer set mode.
e
Push [F1
≤
] or [F2
≥
] to select the desired set item.
r
Set the desired condition using the tuning dial.
• Push [F3] for 1 sec. to select a default condition or value.
t
Push [MENU] 2 times to return to
M1
.
F 1
F 2
F 3
F 4
F 5
1
Set item up/down
5 O %
S i d e T o n e L e v e l
1.
Side Tone Level
This item sets the CW side tone output level.
• 0 to 100% in 1% steps can be selected.
5 O %
1
S i d e T o n e L e v e l
2.
Side Tone L-lmt
This item sets the CW side tone level limit. When the
[AF] control is rotated above a specified level, the CW
side tone does not increase.
ON
CW side tone level is limited. (default)
OFF
CW side tone level is not limited.
O N
2
S i d e T o n e L - l m t
3.
Repeat Time
When sending CW using the repeat timer, this item
sets the time between transmission.
• 1 to 60 sec. in 1 sec. steps can be selected.
2 s
3
R e p e a t T i m e
4.
Dot/Dash Ratio
This item sets the dot/dash ratio.
• 1:1:2.8 to 1:1:4.5 (in 0.12 steps) can be selected.
Keying weight example:
Morse code “K”
1 : 1 : 3 . O
4
D o t / D a s h R a t i o
DASH
Weight setting:
1:1:3 (default)
Weight setting:
Adjusted
DASH
DOT (fixed*)
Adjustable range
SPACE (fixed*)
*SPACE and DOT length can be
adjusted with [KEY SPEED] only.
IC-746PRO.qxd 02.4.2 11:31 Page 33
Summary of Contents for i746PRO
Page 115: ......
