40
9
SCAN OPERATION
■
Skip channel
setting
The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
➀
Select a memory channel:
➥
Select memory mode by pushing [M/CALL] once or
twice.
➥
Rotate the tuning dial to select the memory channel.
➁
Push [SET] one or more times until “CHS” appears as
shown above.
➂
Rotate the tuning dial to turn the skip function ON or OFF
for the selected channel.
• “
~
” appears
: The memory channel is skipped during
(CHS-ON)
memory scan.
• “
~
” disappears
: The memory channel is scanned during
(CHS-OFF)
memory scan.
➃
Push [V/MHz] to exit set mode.
USING
SET MODE
The display shows that
memory channel 10 is set
as a skip channel.
M
X
SKIP
9
5
1
Ä
Select a memory channel.
➥
Select memory mode by pushing [MR].
➥
Push [
Y
] or [
Z
] to select a memory channel.
Å
Push [
F
SET] one or more times until “CHS” ap-
pears as shown at left.
Ç
Push [
Y
] or [
Z
] to set or cancel the skip setting.
• See item
➂
at left for skip indicator details.
É
Push [
E
CLR] to exit set mode.
☞
NOTES:
Even though scan edge channels cannot be set as skip
channels, they ARE skipped during memory scan.
Memory channels programmed with memory names can-
not be set as skip channels. To set them as skip channels,
first push and hold [ANM] for 1 sec., then set as described
above.
SET
B
