Icom IC-2300H Instruction Manual Download

Page: 51 / 66

■

Tone/DTCS squelch operation

The tone squelch or DTCS squelch opens when a sig-
nal with the same pre-programmed subaudible tone or
DTCS code is received.
The reverse tone or DTCS squelch is convenient when
you want to ignore the specifi c signal. The transceiver
closes the squelch when a signal with the same pre-
programmed subaudible tone or code is received.

Set the operating frequency.

Push

[SET]

to enter the Set mode.

Set the tone frequency, or DTCS code and DTCS

polarity. (p. 45)

Push any key other than

[SET]

[MONI]

to exit the

Set mode.

Push

[TONE]

several times to select the desired

tone or code.

“ ” :

Tone

squelch

“ ”

: DTCS squelch

“

”

: Reverse tone squelch

“

”

: Reverse DTCS squelch

Operate the transceiver in the normal way; push

[PTT]

to transmit; release

[PTT]

to receive.

• To manually open the squelch, push

[MONI]

When the tone or DTCS is in use:

When a matched tone is received, the squelch opens

and audio is heard.

•

If the signal includes an unmatched tone, the
squelch does not open. However, the S/RF meter
shows the signal strength.

When the reverse tone or DTCS is in use:

When a matched tone is received, the squelch re-

mains closing.

•

If the signal includes a matched tone, the squelch
does not open. However, the S/RF meter shows the
signal strength.

To cancel the tone or DTCS squelch, push

[TONE]

several times, until the tone icon disappears.

Using the HM-133V

Set the operating frequency.

Program the CTCSS tone frequency or DTCS code
in the Set mode. (p. 45)

Push

[FUNC]

then

[TSQL]

[DTCS]

, to

turn ON the tone squelch or DTCS squelch.

When a matched tone is received, the squelch opens
and audio is heard.

•

If the signal includes an unmatched tone, the
squelch does not open. However, the S/RF meter
shows the signal strength.

•

To manually open the squelch, push

[MONI]

Operate the transceiver in the normal way ;push

[PTT]

to transmit; release

[PTT]

to receive.

To cancel the tone squelch, push

[FUNC]

then

[T-OFF]

•

The

“ ” icon or “ ” icon disappears

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

Push

[SET]

to enter the Set mode.

Push

[TONE]

one or more times to turn ON the tone squelch or DTCS.

Push

[SET]

[MONI]

to select the item,

and then rotate

[DIAL]

to set the option or value.

Appears when the tone squelch
is activated.

Appears when the DTCS squelch
is activated.

Setting the tone frequency

Setting the DTCS code

Setting the DTCS polarity

Push any key other than

[SET]

[MONI]

to exit the Set mode.

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO BUSY

MUTE
NAR
MID
LOW

Appears when the tone squelch
is activated.

Appears when the DTCS squelch
is activated.

Push

to enter the Set mode.

Push then or

to turn ON the tone squelch or DTCS.

Push

to select the item,

and then push

to set the option or value.

Setting the tone frequency

Setting the DTCS code

Setting the DTCS polarity

Push to exit the Set mode.

POCKET BEEP AND TONE SQUELCH

Summary of Contents for IC-2300H



































































Search results

Summary of Contents for IC-2300H

Reviews:

Related manuals for IC-2300H

Brands by name

Popular brands

Icom IC-2300H, Instruction Manual

Search results

Summary of Contents for IC-2300H

Reviews:

Related manuals for IC-2300H

Brands by name

Popular brands