47
8
PRIORITY WATCH
New2001
■
Priority watch operation
q
Select VFO mode; then, set an operating frequency in the
desired band (left or right).
w
Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push the same band’s
[V/MHz•SCAN] for 1 sec. to start memory scan.
For call channel watch:
Select the desired call channel by pushing the same
band’s [M/CALL•MW] once or twice, then rotate the [DIAL].
e
Push [LOW•PRIO] for 1 sec. to start the watch.
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 45)
• While the watch is pausing, pushing the [M/CALL(PRIO)] re-
sumes the watch manually.
r
Push [LOW•PRIO] for 1 sec. to stop the watch.
z
Select VFO mode; then, set the desired fre-
quency.
x
Set the watching channel(s).
For memory channel watch:
Push [MR/CALL] then [
Y
] or [
Z
] to select the de-
sired memory channel.
For memory scan watch:
Push [MR/CALL], then push [
SCAN
2] to start the
memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [
Y
] or [
Z
]
to select the call channel.
c
Push [
PRIO
3(PTT-M)] to start the watch.
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan re-
sume condition. (p. 45)
• To resume the watch manually when paused, push
[
PRIO
3(PTT-M)] or [
CLR
A(MW)].
v
To stop the watch, push [
CLR
A(MW)] once (or
twice while watch is paused).
PRIO
3
IC-2720H_2.qxd 03.5.13 9:45 Page 47 (1,1)
