7
SELCALL (Selective Calling)
7-4
Receiving
D
Receiving an individual Selcall
When receiving an RX code:
• Beeps sound.
• The RX code’s text is displayed, if entered.
• “
ë
” and channel name blink, and the Selcall mute is
released.
➥
Hold down [PTT] and speak at your normal voice
level.
D
Receiving a Group call
When receiving a Group call:
• Beeps sound.
• “
ë
” and “GROUP” blink, and the Selcall mute is released.
➥
Hold down [PTT] and speak at your normal voice
level.
NOTE:
• If the ID decode function “ID Dec” is turned ON,
the received Own ID code is displayed instead
of the text, and stored into the transceiver. This
function can be turned ON using the CS-410PRO
cloning
software
.
• A maximum of 8 individual RX codes can be
stored into the transceiver.
• You can set the Group call receiving options using the
optional CS-410PRO
cloning
software
. Consult the CS-
410PRO help file for more information.
When the Quiet mode is ON, the Selcall mute function
is activated and enables silent operation until a Selcall
code is received.
1) Enter the Set mode.
➥
Hold down [FUNC] for 2 seconds.
2) Select the “QUIET” menu.
➥
Push [FUNC].
3) Turn the Quiet mode ON or OFF.
➥
Push[UP]/[DOWN].
• “Q” is displayed when the Quiet mode is ON.
4)
Exit the Set mode.
➥
Hold down [FUNC] for 2 seconds.
Quiet mode
NOTE:
The Unmute mode may automatically return
to the Mute mode after a specified time period,
depending on the presetting.
Stun function
If the transceiver is in the Stun mode, it will request a
password when you turn ON the transceiver.
This function can only be set by your dealer. Once the
password has been entered, the transceiver will not
prompt you to enter it again.
Cloning and transceiver operations are disabled
after a Kill ID is received. By activating the Clone
Write mode, you can use the transceiver again. (The
internal data cannot be accessed using the Clone
Read mode.)
