7-4
7. MEMORY OPERATION
Entering a group/Memory name
You can assign a name of up to 16 characters
to each channel group (00 ~ 99) and Memory
channel.
D
Entering a group name
1. Open the MEMORY GROUP screen.
»
MEMORY
2. Touch the channel group that you want to
enter a name, for 1 second. (Example: 01)
3. Touch “Edit Name.”
4. Enter a group name, then touch [ENT].
5. To close the MEMORY GROUP screen, push
.
D
Entering a Memory name
1. Open the MEMORY GROUP screen.
»
MEMORY
2. Touch the channel group. (Example: 01)
3. Touch of the channel that you want to enter
a name. (Example: channel 01)
4. Touch “Edit Name.”
5. Enter a name, then touch [ENT].
6. To close the MEMORY screen, push
several times.
Memory name
L
The Memory name is not displayed when the
Mini Scope screen or expanded screen is
displayed.
L
You can also select not to display the Memory
name on the standby screen.
» SET > Display >
Memory Name
