9-4
9. OTHER FUNCTIONS
NTP function
The Network Time Protocol (NTP) function
synchronizes the internal clock with a time
management server.
L
To use this function, an internet connection and
default gateway settings are necessary.
D
Using the NTP Time Synchronize
function
Using this function, you can manually
synchronize the internal clock by accessing a
time management server.
1. Open the DATE/TIME screen.
» SET > Time Set >
Date/Time
2. Touch “<<NTP TIME SYNC>>.”
• “ NTP Time Sync. Please wait...” is displayed.
• The transceiver starts accessing the NTP server
address that is set in “NTP Server Address.”
3. When “Time Sync completed.” is displayed,
touch [OK].
4. To close the DATE/TIME screen, push
several times.
D
Using the NTP function
By turning ON the NTP function, the transceiver
automatically synchronizes the internal clock with
the time management server.
L
This function is set to ON by default.
1. Open the DATE/TIME screen.
» SET > Time Set >
Date/Time
2. Touch “NTP Function.”
3. Select ON or OFF.
• When ON is selected, the transceiver starts
accessing the NTP server address that is set in
“NTP Server Address.”
4. To close the DATE/TIME screen, push
several times.
