12-32
12. GPS OPERATION (ADVANCED)
»
GPS
GPS TX Mode
(Default: OFF)
Selects a GPS transmission mode to send GPS
position data while in the DV mode.
•OFF: Does not transmit GPS data.
•D-PRS: Transmits GPS data in the D-PRS
format.
•NMEA: Transmits GPS data in the NMEA
format.
» GPS > GPS TX Mode >
D-PRS
Unproto Address
(Default: API705,DSTAR*)
Displays an unproto address of up to 56
alphanumeric characters.
NOTE:
You should use the default address, and
editing is not recommended.
TX Format
(Default: Position)
Selects the format to transmit the position data in
the D-PRS mode.
•Position: The caller station is the mobile or
base station.
•Object: Transmits a certain location’s
information, such as an event,
earthquake, and so on.
(The time stamp data is included.)
•Item:
Transmits repeater or antenna
information that needs no time
information.
(The time stamp data is not included.)
•Weather: Transmits weather information
received from a weather device.
GPS SET
» GPS > GPS TX Mode > D-PRS
> TX Format >
Position
Symbol
(Default: Person)
Selects the symbol that indicates your operating
situation. The selected symbol channel’s symbol
(1~4) is transmitted along with the position data.
Editing a symbol
1. Touch the symbol channel for 1 second.
2. Touch “Edit Symbol.”
3. Push
.
4. Touch “Direct Input.”
5.
Touch [+]/[−] to edit the first digit.
6.
Touch [+]/[−] to edit the second digit.
Selectable characters and symbols
<For the first digit>
/, \, 0 to 9, A to Z
<For the second digit>
A to Z, a to z, 0 to 9, ! “ # $ %
& ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
7. After editing, touch [SET].
• Sets the Symbol into the channel selected in
step 1.
Editing a symbol
1. Touch the symbol channel for 1 second.
2. Touch “Edit Symbol.”
3. Touch the symbol.
• Sets the Symbol into the channel selected in
step 1.
