7. MEMORY OPERATION
60
Memory channels
The Memory mode enables you to quickly select
often-used frequencies, modes and other parameters.
You can change the operating frequency, mode and
so on while operating in the Memory mode.
L
You can temporarily tune all the memory channel
frequencies by rotating
MAIN DIAL
.
Memory
channel
Displayed
1 ~ 99
Regular memory channels.
1 frequency, 1 mode, 1 ilter, memory name,
tone settings (including tone frequencies
for repeater and tone squelch) and select
memory scan setting in each memory
channel.
P1/P2
Scan Edge memory channels.
1 frequency, and 1 mode and 1 ilter in
each memory channel as scan edges for
programmed scans.
Selecting a Memory channel
1. Select the Main band or Sub band. (Example:
Main band)
2. Push
QUICK
, and then touch “VFO/MEMORY”
on the Quick menu.
3. Touch [MEMORY] to select the Memory mode.
Memory mode
(Example: Memory channel 1)
4. Select the Memory channel.
Rotating
MULTI
to select a channel:
Rotate
MULTI
util you select the Memory
channel you want to use. (Example: 2)
To close the VFO/Memory screen, push
EXIT
.
Selecting a channel on the MEMORY screen:
Display the MEMORY screen, and then touch to
select a Memory channel. (Example: 2)
• The channel is selected and automatically closes the
MEMORY screen.
MENU
»
MEMORY
