7-8
7
VOICE RECORDER FUNCTIONS
■
Playing the recorded audio (continued)
D
One-touch playing
The previously recorded audio in message 1 can be
played back without selecting voice recorder screen.
PLAY
➥
Push
PLAY
momentarily to play back the last 5
seconds of the previously recorded audio.
• “
≈
PLAY
” indicator appears.
• Playback is terminated automatically after 5 seconds.
• The playback time period can be set in voice set mode.
(p. 7-13)
➥
Hold down
PLAY
for 1 second to playback all of the
previously recorded audio.
• “
≈
PLAY
” indicator appears.
• Playback is terminated automatically when all of the re
-
corded contents in the channel are played.
■
Protect the recorded contents
The protect function is available to protect the recorded
contents from accidental erasure, such as over-writing,
etc.
F-4
PROTECT
F-1
∫
F-2
√
q
Push
EXIT/SET
several times to close a multi-
function screen, if necessary.
w
Push [VOICE]
F-2
to display the Voice recorder
menu.
e
Push [PLAY]
F-1
to display the Voice recorder
screen.
• Previously selected screen, TX or RX memory, is dis
-
played. If the TX memory message (T1–T4) appears,
push [T/R]
F-7
to select RX memory message.
r
Push [
Y
]
F-1
or [
Z
]
F-2
to select the desired
voice message.
t
Push [PROTECT]
F-4
to turn the protect function
ON or OFF.
• “
” indicator appears when the contents is protected.
y
Push
EXIT/SET
twice to exit the voice recorder
menu.
■
Erasing the recorded contents
The recorded contents can be erased independently
by message.
F-5
CLR
F-1
∫
F-2
√
q
Perform the steps
q
to
e
as “
■
Protect the re-
corded contents” above.
w
Push [
Y
]
F-1
or [
Z
]
F-2
to select the desired
voice message to be erased.
e
Hold down [CLR]
F-5
for 1 second to erase the
contents.
• Push [PROTECT]
F-4
to release the protection in ad-
vance if necessary.
r
Push
EXIT/SET
twice to exit the voice recorder
menu.
