7-14
7
VOICE RECORDER FUNCTIONS
QSO REC Mode
TX&RX
Select the recording mode for recording a QSO
audio.
• TX&RX : Records both the transmitted and received
audio.
• RX only : Records only the received audio.
RX REC Condition
Squelch Auto
Select whether or not the squelch status affects the
RX voice audio recording.
• Always:
The transceiver always records the
RX audio, regardless of the squelch
status.
• Squelch Auto: The transceiver records the RX audio
only when a signal is received (the
squelch is opened).
When the squelch closes while re-
cording, the recording will continue
for 2 seconds, and then pause.
File Split
ON
Turn the File Split function ON or OFF.
• OFF: The audio is continuously recorded into the
file, even if you switch between transmit and
receive or the squelch status changes be-
tween open and closed.
• ON: While recording, and if you switch between
transmit and receive, or the squelch status
changes between open and closed, a new file
is automatically created in the same folder,
and the audio is saved into the new one.
PTT Auto REC
OFF
Turn the PTT Automatic Recording function ON or
OFF.
• OFF: The recording does not start even if a signal is
transmitted.
• ON: The recording automatically starts when a sig
-
nal is transmitted.
The recording will continue when:
• A signal is transmitted again within 10 seconds
after the last transmission.
• A signal is received within 10 seconds after the
last transmission, the received audio is also re-
corded.
- A signal is received within 10 seconds after the
last reception.
• The squelch is open in the FM modes.
The recording will stop when:
• The frequency or operating mode is changed.
• The operating method (V/M, M-CH, Band Stack
-
ing Register, and so on) is changed.
• 10 minutes has past after the last transmission
while the squelch is open in the SSB, CW, RTTY,
PSK or AM modes.
QSO PLAY Skip Time
10s
Set the Skip time for forwarding or rewinding while
playing back the QSO audio.
3, 5, 10 and 30 seconds are selectable.
■
Voice set mode (continued)
