8-2
■
Memory channels
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
■
Memory channel selection
D
Using the
∫
/
√
keys
q
Push
V/M
to select memory mode.
w
Push
∫
/
√
several times to select the de-
sired memory channel.
• Hold down
∫
/
√
for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e
To return to VFO mode, push
V/M
again.
D
Using the keypad
q
Push
V/M
to select memory mode.
w
Push
F-INP
ENT
.
e
Push the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r
Push
∫
or
√
to select the desired memory
channel.
[EXAMPLE]
To select the memory channel 3;
- Push
F-INP
ENT
,
7
3
, then push
∫
or
√
.
To select the memory channel 12;
- Push
F-INP
ENT
,
1.8
1
,
3.5
2
, then push
∫
or
√
.
To select the scan edge channel P1;
- Push
F-INP
ENT
,
1.8
1
,
50
0
,
50
0
, then
push
∫
or
√
.
To select the scan edge channel P2;
- Push
F-INP
ENT
,
1.8
1
,
50
0
,
1.8
1
, then
push
∫
or
√
.
V/M
Y
Z
Keypad
F-IMP
ENT
V/M
Y
Z
8
MEMORY OPERATION
MEMORY
MEMORY
TRANSFER
OVER-
CHANNEL
CHANNEL
CAPABILITY
TO VFO
WRITING
CLEAR
NUMBER
Regular memory
1–99
Yes
Yes
Yes
channels
Scan edge
memory
P1, P2
Yes
Yes
No
channels
Independent transmit and
receive frequencies and modes
in each memory channel.
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
