■
Frequency transfers
The frequency and operating mode in a memory
channel can be transferred to the VFO. Frequency
transfers can be performed in either VFO mode or
memory mode.
D
Transferring in VFO mode
This is useful for transferring programmed contents to
a VFO.
q
Select VFO mode with
V/M
.
w
Select the memory channel to be transferred with
/
.
• Memory list screen is convenient for selecting the de
-
sired channel.
• Memory channel contents appear in the memory chan
-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel. In this case transferring is not possible.
e
Hold down
V/M
for 1 second to transfer the fre-
quency and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
D
Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
•
Displayed
frequency, mode and filter setting are
transferred.
•
Programmed
frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q
Select the memory channel to be transferred with
/
in memory mode.
• And, set the frequency or operating mode if required.
w
Hold down
V/M
for 1 second to transfer the fre-
quency and operating mode.
• Displayed frequency and operating mode are trans
-
ferred to the VFO.
e
To return to VFO mode, push
V/M
momentarily.
8-4
8
MEMORY OPERATION
TRANSFER EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
or
Hold down for 1 sec.
Beep
Beep
Beep
V/M
TRANSFER EXAMPLE IN MEMORY MODE
VFO frequency
: 21.320 MHz/USB
Contents of M-ch 16 : 14.018 MHz/CW
Hold down for 1 sec.
Beep
Beep
Beep
Programmed contents appear.
V/M
∫
√
∫
√
