8-5
8
MEMORY OPERATION
■
Memory list screen
The memory list screen simultaneously shows 9
memory channels and their programmed contents.
15 memory channels can be displayed in the wide
memory list screen.
You can select a desired memory channel from the
memory list screen.
D
Selecting a memory channel using the memory list screen
q
Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w
Push [MEMORY]
F-4
to select memory list
screen.
• [WIDE]
F-7
switches the standard and wide screens.
e
While holding down [ROLL]
F-1
, rotate the main
dial to select the desired memory channel.
•
∫
and
√
can also be used.
r
Push
EXIT/SET
to exit memory list screen.
• Memory list screen
D
Confirming programmed memory channels
q
Select memory list screen as described above.
w
While pushing [ROLL]
F-1
, rotate the main dial to
scroll the screen.
e
Push [SET]
F-2
to select the highlighted memory
channel, if desired.
• “
u
” appears beside the selected memory channel
number in the memory list screen and the selected
memory channel contents are displayed below the fre-
quency readout.
r
Push
EXIT/SET
to exit memory list screen.
Main dial
F-2
SET
F-1
ROLL
EXIT/SET
Main dial
Z
Y
F-7
WIDE
F-1
ROLL
F-4
MEMORY
EXIT/SET
