9-5
■
Fine programmed scan/Fine
∂
F scan
In fine scan (programmed or
∂
F), the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step shifts from
50 Hz to 10 Hz when the squelch opens.
q
Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w
Push [SCAN]
F-5
to select the scan screen.
e
Set for programmed scan or
∂
F scan as described
on previous page.
r
Push [PROG]
F-1
or [
∂
F]
F-2
to start a scan.
• “
PROGRAM SCAN
” o r “
:
F SCAN
” a n d d e c i m a l
points blink while scanning.
t
Push [FINE]
F-3
to start a fine scan.
• “
FINE PROGRAM SCAN
” or “
FINE
:
F SCAN
” blinks in-
stead of “
PROGRAM SCAN
” or “
:
F SCAN
,” respec-
tively.
y
When the scan detects a signal, the scan speed
decreases but scan does not stop.
u
Push [PROG]
F-1
or [
∂
F]
F-2
to stop the scan;
push [FINE]
F-3
to cancel the fine scan.
• Rotating the main dial also cancels the scan.
i
Hold down [RECALL]
F-6
for 1 second to recall
the frequency that is set before starting the scan, if
desired.
F-2
∂
F
F-3
FINE
F-1
PROG
EXIT/SET
9
SCANS
