11-4
■
Setting sleep timer
The sleep timer turns the transceiver power OFF au-
tomatically after passing the set period. The timer can
be set to 5–120 minutes in 5 minute steps.
The sleep timer function counts the ‘minute’ units,
and does not count the ‘second’ units. For example,
when the sleep timer is started at 12:00 59, first one
minute past for just 1 second. The maximum error is
therefore 59 seconds. This is normal, not a malfunc-
tion.
Main dial
SLEEP
EXIT/SET
/
F-4
F-7
SET
CLR
TIMER
q
Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w
Hold down
TIMER
for 1 second to select timer set
screen.
e
Push [SLEEP]
F-7
to select the sleep timer set
condition.
• “– – –” blinks.
r
Set the desired time period using the main dial.
• “TIMER–set Push [SET]” blinks.
• Push [CLR]
F-4
to select “– – –” to cancel the setting.
t
Push [SET]
F-7
to set the time.
• Push
EXIT/SET
to cancel the setting.
• The timer indicator above
TIMER
switch lights green.
y
Push
EXIT/SET
to exit timer set screen.
u
The transceiver emits 10 beeps and turns OFF
after the sleep timer period elapses.
• The timer indicator blinks while beeping.
• Push
TIMER
momentarily to cancel the sleep timer, if
desired.
■
Timer operation
POWER
TIMER
q
Preset the daily timer as described previously.
w
Push
TIMER
momentarily to turn the timer func-
tion ON.
• The timer indicator above this switch lights green when
the timer function is ON.
e
Hold down
POWER
for 1 second to turn the power
OFF.
• The timer indicator lights continuously.
r
When the set time arrives, the power is automati-
cally turned ON.
t
The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
• The timer indicator blinks while beeping.
• Push
TIMER
momentarily to cancel the sleep timer, if
desired.
Timer action in the timer set screen must be se-
lected ON to enable timer operation, described in
page 11-3 steps
r
.
11
CLOCK AND TIMERS
