12-25
12
SET MODE
Load Contents
Select
Selects file load condition from All and Select.
(default: Select)
• All
: Loads and sets the all following contents.
• Select : Loads and sets the selected contents only.
ANT Memory
NO
Selects the antenna memory setting loading condi-
tion from YES and NO. (default: NO).
• YES : Loads and sets the antenna memory.
• NO
: Use the original antenna memory setting.
REF IN/OUT, REF Adjust
NO
Selects the reference signal setting load condition
from YES and NO. (default: NO).
• YES : Loads and sets the reference signal set
-
ting.
• NO
: Use the original reference signal setting.
Network Settings
NO
Selects the Network settings loading condition from
YES and NO. (default: NO).
• YES : Loads and sets the Network settings.
• NO
: Use the original Network settings.
CI–V Address
NO
Selects the CI-V address setting load condition from
YES and NO. (default: NO).
• YES : Loads and sets the CI-V address setting.
• NO
: Use the original CI-V address setting.
Other Memory & Settings
YES
This setting is fixed “YES.”
• YES : Loads and sets memory channel contents
and other settings.
Voice TX Memory
YES
Selects the voice TX message load condition from
YES and NO. (default: YES).
• YES : Loads and sets voice TX message.
• NO
: Use the original voice TX message.
Voice RX Memory
NO
Selects the voice RX message load condition from
YES and NO. (default: NO).
• YES : Loads and sets voice RX message.
• NO
: Use the original voice RX message.
D
Load option set mode
