3-6
D
Quick tuning step
The operating frequency can be changed in larger
steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable)
for quick tuning.
q
Push [TS] to turn the quick tuning function ON.
• “
Z
” appears when the quick tuning function is ON.
w
Rotate the main dial to change the frequency in
programmed kHz steps.
e
Push [TS] again to turn OFF the indicator.
r
Rotate the main dial for normal tuning if desired.
3
BASIC OPERATIONS
Quick tuning indicator
D
1
⁄
4
tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1
⁄
4
tuning function is selectable. Dial rotation is re-
duced to
1
⁄
4
of normal speed when the
1
⁄
4
tuning func-
tion is ON for finer tuning control.
➥
Push [1/4]
(MF6)
to toggle the
1
⁄
4
tuning function
ON or OFF.
• “
1
⁄
4
” appears when the
1
⁄
4
tuning function is ON.
D
Selecting “kHz” step
q
Push [TS] to turn the quick tuning function ON or
OFF.
• “
Z
” appears when the quick tuning function ON.
w
Hold down [TS] for 1 second to enter quick tuning
step set mode.
• Selected tuning steps for all modes appear.
e
Select the desired operating mode.
r
Rotate the main dial to select the desired tuning
step.
t
Repeat steps
e
and
r
to select quick tuning
steps for other modes, if desired.
y
Push
EXIT/SET
to exit the setting display.
NOTE:
When entering quick tuning step set mode,
the quick tuning function must be activated first.
Main dial
Select mode
TS
1/4
1
⁄
4
tuning step OFF
1
⁄
4
tuning step ON
1 / 4
ON
1 / 4
OFF
