4-16
D
RTTY memory transmission
Pre-set characters can be sent using the RTTY memo-
ry. Contents of the memory are set using the edit menu.
q
During RTTY mode operation, push [DECODE]
F-3
to select RTTY decode screen.
w
Push [TX MEM]
F-4
to select RTTY memory
screen.
e
Push [1–4/5–8]
F-7
to select memory bank then
push one of the function keys ([RT1]
F-1
to
[RT4]
F-4
or [RT5]
F-1
to [RT8]
F-4
).
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pressed, depending on auto transmission/
reception setting (see below).
• The transmission date, time, reception date and/or time may
be displayed in RX contents screen, depending on setting.
For your information
When an external keypad is connected, the pro
-
grammed contents, RT1–RT4, can be transmitted.
See pages 2-7 and 12-16 for details.
D
Automatic transmission/reception setting
q
During RTTY mode operation, push [DECODE]
F-3
to select RTTY decode screen.
w
Push [TX MEM]
F-4
to select RTTY memory
screen, then push [EDIT]
F-6
to select RTTY
memory edit screen.
• RTTY memory contents of the Channel 1 (RT1) is se
-
lected.
e
Push [RT1..RT8]
F-7
several times to select the
desired RTTY memory.
r
Push [AUTO TX]
F-6
several times to select the
desired operating option as follow.
• AUTO TX/RX : Automatically transmits the se
-
lected memory and returns to re-
ceive after the transmission.
• AUTO TX
: Automatically transmits the se
-
lected memor y. To retur n to
receive, press [F12] on the key-
board.
• AUTO RX
: Press [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
• No indication :
Press [F12] on the keyboard to trans-
mit the selected memory and press
[F12] again to return to receive.
t
Push
EXIT/SET
to exit RTTY memory edit condi
-
tion.
NOTE:
The transceiver always functions in the
“AUTO TX/RX” setting when no keyboard is con-
nected.
EXIT/SET
F-7
RT1..RT8
F-6
AUTO TX
–
–
or
F-7
1–4/5–8
F-1
RT1
F-4
RT4
F-1
RT5
F-4
RT8
EXIT/SET
4
RECEIVE AND TRANSMIT
