4-24
D
PSK memory transmission
Previously entered characters can be sent using the
PSK memory. Contents of the memory are set using
the edit menu.
q
During PSK mode operation, push [DECODE]
F-3
to select PSK decode screen.
w
Push [TX MEM]
F-4
to select PSK memory
screen.
e
Push [1–4/5–8]
F-7
to select memory bank then
push one of the function keys ([PT1]
F-1
to
[PT4]
F-4
or [PT5]
F-1
to [PT8]
F-4
).
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pressed, depending on auto transmission/
reception setting (see below).
• The transmission date, time, reception date and/or time may
be displayed in RX contents screen, depending on setting.
For your information
When an external keypad is connected, the pro
-
grammed contents, PT1–PT4, can be transmitted.
See pages 2-7 and 12-17 for details.
D
Automatic transmission/reception setting
q
During PSK mode operation, push [DECODE]
F-3
to select PSK decode screen.
w
Push [TX MEM]
F-4
to select PSK memory
screen, then push [EDIT]
F-6
to select PSK mem-
ory edit screen.
• PSK memory contents of Channel 1 (PT1) is selected.
e
Push [PT1..PT8]
F-7
several times to select the
desired PSK memory.
r
Push [AUTO TX]
F-6
several times to select the
desired operating option, as follows.
• AUTO TX/RX : Automatically transmits the selected
memory contents and returns to re-
ceive after the transmission.
• AUTO TX
: Automatically transmits the selected
memory contents. To return to re-
ceive, press [F12] on the keyboard.
• AUTO RX
: Press [F12] on the keyboard to
transmit the selected memory
contents. Automatically returns to
receive after the transmission.
• No indication : Press [F12] on the keyboard to
transmit the selected memory
contents and press [F12] again to
return to receive.
t
Push
EXIT/SET
to return to exit from PSK memory
edit condition.
NOTE:
The transceiver always functions in the
“AUTO TX/RX” setting when no keyboard is con-
nected.
EXIT/SET
F-7
PT1..PT8
F-6
AUTO TX
–
–
or
F-7
1–4/5–8
F-1
PT1
F-4
PT4
F-1
PT5
F-4
PT8
EXIT/SET
4
RECEIVE AND TRANSMIT
