4-26
D
PSK decode set mode
This set mode is used to set the FFT scope setting,
time stamp setting, etc.
• Setting contents
q
During PSK mode operation, push [DECODE]
F-3
to select PSK decode screen.
w
Push [<MENU1>]
F-1
to select PSK decode sec-
ond menu, then push [SET]
F-6
to select PSK
decode set mode.
• Push [WIDE]
F-7
to toggle the screen size between
normal and wide.
e
Push [
Y
]
F-1
or [
Z
]
F-2
to select the desired
set item.
r
Set the desired condition using the main dial.
• Hold down [DEF]
F-4
for 1 second to select a default
condition or value.
• Push [
t
u
]
F-3
to select the set contents for some
items.
t
Push
EXIT/SET
to exit from set mode.
F-3
F-7
WIDE
Ω ≈
Main dial
EXIT/SET
DEF
F-1
∫
F-2
√
F-4
4
RECEIVE AND TRANSMIT
PSK FFT Scope Averaging
OFF
Select the FFT scope waveform averaging function
from 2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning, using
the default or smaller averaging setting is recom-
mended.
PSK FFT Scope Waveform Color
51
153
255
Set the color for the FFT scope waveform.
• The color is set in RGB format.
• The set color is indicated in the box beside the RGB
scale.
•
Push [
t
u
]
F-3
to select R (Red), G (Green) and B
(Blue), and then rotate the main dial to set the ratio from 0
to 255.
PSK AFC Range
±
15Hz
Select the AFC (Automatic Frequency Control) func-
tion operating range from ±15 Hz (default) and ±8
Hz.
NOTE:
The AFC function may not tune the signal
properly when a weak PSK signal is received.
PSK Time Stamp
ON
Turn the time stamp (date, transmission or reception
time) display ON or OFF.
• ON : Displays the time stamp.
• OFF : No time stamp display.
PSK Time Stamp (Time)
Local
Selects the clock display for time stamp usage.
NOTE:
The time won’t be displayed when “OFF”
is selected in “PSK Time Stamp” as shown
above.
• Local : Selects the time that set in “Time (Now).”
• UTC* : Selects the time that set in “CLOCK2.”
* The name of choice may differ according to
“CLOCK2 Name” setting (p. 11-2). “UTC” is the
default name of CLOCK2.
