5-5
D
Scope set mode (continued)
5
FUNCTIONS FOR RECEIVE
Scope during Tx (CENTER Type)
ON
Turn display of the transmit signal ON or OFF.
NOTE:
Transmit signal display is available for the
center mode only.
Max Hold
ON
Turn the peak level hold function ON or OFF.
CENTER Type Display
Filter Center
Select the center frequency of the spectrum scope
display (center mode only).
• Filter Center : Shows the selected filter’s center
frequency at the center.
• Carrier Point Center
: Shows the selected operating
mode carrier point frequency at the
center.
• Carrier Point Center (Abs. Freq.)
: In addition to the carrier point
center setting above, the actual fre-
quency is displayed at the bottom
of the scope.
Waveform Type
Fill
Select the outline indication of the waveform for the
spectrum scope.
• Fill
: The waveform is described by only
the color.
• Fill + Line
: The waveform is described by the
color and outline.
Waveform Color (Current)
217
241
247
Set the waveform color for the currently received sig-
nals.
• The color is set in RGB format.
• Push [
t
u
]
F-3
to select R (Red), G (Green) and
B (Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the
RGB scale.
Waveform Color (Line)
70
30
0
Set the waveform color for the currently received sig-
nals.
• The color is set in RGB format.
• Push [F-3•
Ω
≈
] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the RGB
scale.
Waveform Color (Max Hold)
58
110
147
Set the waveform color for the received signals max
-
imum level.
• The color is set in RGB format.
• Push [
t
u
]
F-3
to select R (Red), G (Green) and
B (Blue), and rotate the ratio from 0 to 255 range.
• The set color is indicated in the box beside the
RGB scale.
