3-3
While holding down, turn ON the power.
RF-A UNIT
RF-A UNIT
MAIN UNIT
<Adjustment main menu screen>
CAUTION:
When a TX adjustment item is selected,
the transceiver automatically transmits.
RF-A UNIT
RF-A UNIT
MAIN UNIT
Adjusts the value for the item.
Adjustment presets (page 4-17)
Enters to the ID adjustment (page 4-15)
Reference signal adjustment (page 4-17)
Transmitter adjustment (page 4-13)
Receiver adjustment (page 4-15)
Scope adjustment (page 4-15)
Stores the adjustment value.
M
ENTERING THE ADJUSTMENT MODE
1) Insert the short pin to the [REMOTE] jack.
2) While holding down the [SSB] and [CW] keys, turn ON the power.
M
QUITTING THE ADJUSTMENT MODE
1) Remove the short pin from the [REMOTE] jack.
2) Turn OFF the power, and then turn ON the power again.
M
MAIN ADJUSTMENT MENU
