30
6
REPEATER AND DUPLEX OPERATIONS
■
Accessing a repeater
q
Set the receive frequency
(repeater output frequency)
.
w
Set the shift direction of the transmit frequency.
(–DUP or
+DUP; see p. 32 for details.)
e
Push and hold
[TONE](7)
for 1 sec. to activate the sub-
audible tone encoder, according to repeater requirements.
• “TONE” appears.
Refer to p. 107 for tone frequency settings.
r
Push and hold
[PTT]
to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• If “OFF” appears, check the offset frequency or shift direction.
(p. 30)
t
Release
[PTT]
to receive.
y
Push and hold
[SQL]
to check whether the other station’s
transmit signal can be directly received or not.
While receiving
While transmitting
A
TONE
FM
145
P SKIP
-DUP
A
TONE
FM
144700
P SKIP
-DUP
300
A
TONE
TONE
FM
FM
145300
-DUP
-DUP
“–DUP”or “+DUP” appears.
