22
3
BASIC OPERATION
3
■
Output power level selection
If the transceiver has [High/Low] assigned to it, the transmit output
power level can be selected, depending on the presetting.
When the battery case is selected as the battery type, or the bat-
tery voltage drops to a low power level and the LED indicator sta-
tus is “Low Battery 2,” the output power automatically switches to
“Low 1.” (pp. 7, 12)
➥
Push [High/Low] to select the transmit output power level.
• One beep sounds when “Low 1” is selected.
• Two beeps sound when “Low 2” is selected.
• Three beeps sound when “High” is selected.
■
Priority A channel selection
When one of the following operations is performed, the transceiver
automatically selects the Priority A channel.
• Turning the power ON
The Priority A channel is selected each time the transceiver pow-
er is turned ON.
• Auto reset
The Priority A channel is selected when the Auto Reset timer
ends.
Summary of Contents for IC-F3101D
Page 62: ...MEMO...
Page 63: ...MEMO...
