8
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
For All types
(Different
operation
with
Non-display
type)
When the following key functions are programmed to Non-
display type, the key functions may be limited and some key
functions should be operated differently from Simple and
10-key types.
HIGH/LOW KEY
“
H/L
”
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
• Ask your dealer for the output power level for each selection.
• Emits one beep when Low 1 is selected, two beeps when Low 2 is
selected and three beeps when High is selected. (Non-display type
only)
SCAN KEY
“
SCAN
”
❍
For Simple/10-key types
➥
Push to start and cancel scanning operation.
• When the Power ON Scan, Auto Scan, or Rotary Selector
Home function starts a scan, push this key to cancel the scan.
The canceled scan resumes after the specified time period has
passed.
➥
Push and hold this key for 1 sec. to indicate the scan list,
then push [CH Up] or [CH Down] to select a desired list.
(Depending on the presetting.)
❍
For Non-display type
Push to start and cancel scanning operation.
• When the Power ON Scan, Auto Scan, or Rotary Selector Home
function starts a scan, push this key to cancel the scan. The can-
celed scan resumes after the specified time period has passed.
• The LED indicator blinks green slowly while scanning.
SURVEILLANCE KEY
“
SURV
”
When this function is turned ON, the beep is not emitted and
the LCD backlight does not light when a signal is received or
a key is pushed.
❍
For Simple/10-key types
Push to turn the surveillance function ON or OFF.
❍
For Non-display type
➥
Push and hold for 1 sec. to turn the surveillance function
ON.
➥
When the surveillance function is ON, push to turn the
function OFF.
TALK AROUND KEY
“
TA
” (Conventional operation only)
The talk around function equalizes the transmit frequency to
the receive frequency for transceiver-to-transceiver commu-
nication.
❍
For Simple/10-key types
Push to turn the talk around function ON or OFF.
❍
For Non-display type
➥
Push and hold for 1 sec. to turn the talk around function
ON.
➥
When the talk around function is ON, push to turn the
function OFF.
