i
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL —
This
instruction manual contains important operating instructions
for the
IC-F9011B/S/T VHF P25 TRUNKING HANDHELD
TRANSCEIVERS
and the
IC-F9021B/S/T, IC-F9023B/S/T
UHF P25 TRUNKING HANDHELD TRANSCEIVERS
.
✔
When the optional UT-125
aes/des
encryption
unit
is installed:
When you attempt to re-export this product and/or AES en-
cryption of this product is activated, you must comply with the
export regulations of your country, which can be highly restric-
tive. YOUR FAILURE TO COMPLY WITH EXPORT REGULA-
TIONS MAY SUBJECT YOU TO FINES OR PENALTIES. AES
encryption products including this software fall under the con-
trol of the Japanese Government as described in Appendix I:
Export Legal Controls and Appendix: Exchange Legal Con-
trols. Please consult with your dealer or sales representative
for details.
EXPLICIT DEFINITIONS
WORD
DEFINITION
R
DANGER!
Personal death, serious injury or an explo-
sion may occur.
R
WARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
See the operating guide for details of Analog, MDC and
P25 Trunking/Conventional system operations. Consult
your Icom dealer or system operator for details concern-
ing your transceivers programming.
✔
INFORMATION:
In this instruction manual, the following descriptions are used;
IC-F9011B/IC-F9021B/IC-F9023B : “
Non-display type
”
IC-F9011S/IC-F9021S/IC-F9023S : “
Simple type
”
IC-F9011T/IC-F9021T/IC-F9023T : “
10-key type
”
10-key type
Simple type
Non-display type
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
