32
4
APCO P25 MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
w
Select a desired Individual ID (or name) using
[CH Up]/
[CH Down] or [CH Up/Down].
• The Individual ID can be edited with the 10-keypad*. (Depending
on the presetting.)
* 10-key types only.
To edit the Individual ID using the 10-keypad:
Input the Individual ID directly with the 10-keypad.
• Push
[
M
] to clear a code.
For Handhelds:
For Mobiles:
e
Hold down
[PTT] to transmit the Individual call to the tar-
get station, then speak into the microphone.
• The LED indicator (for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• Depending on the presetting, the target station does not open
the squelch, and communication is not established, if the Indi-
vidual ID or NAC (Network Access Code) is not matched.
r
Release
[PTT] to receive.
D
Receiving
q
When an Individual call is received;
• The LED indicator (for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• The calling station ID (or name) is displayed for 2 seconds (Sim-
ple and 10-key types only)
• Depending on the presetting, the transceiver does not open the
squelch, and communication is not established, if the Individual
ID or NAC (Network Access Code) is not matched.
For Handhelds:
For Mobiles:
I N D I V I D U A L 1
INDIVIDUAL1
INDV TGID SET
The calling station name (or ID)
w
Hold down
[PTT] and speak into the microphone.
e
Release
[PTT] to receive a response.
For P25 Trunking mode operation:
When the Full Off Air Call SetUp (FOACSU) function is
turned ON, beeps sound after receiving a call. In that
case, push
[PTT] to accept the call. Then, operate as de-
scribed in steps
w
and
e
above. If you ignore the call by
not pushing
[PTT] for a preset time period, communication
is not established. Or, pushing
[Home] after receiving the
call will also ignore it.
1 1 1
111
INDV TGID SET
INDV
