37
4
APCO P25 MODE OPERATION
n
Radio Inhibit function
D
Transmitting
A Radio Inhibit function allows you to send a signal that will
inhibit (stun or kill, depending on the presetting) the target
transceiver.
[Digital Button] key assignment is necessary to transmit the
radio inhibit signal.
Not available on Non-display types.
✔
For Trunking mode operation:
This function is usable only for a dispatcher in the Trunking
mode.
q
Push
[Digital Button] to enter the digital call type selec-
tion mode.
w
Push
[CH Up] or [CH Down], or rotate [CH Up/Down] to
select “
RDO INHIBIT.”
For Handhelds:
For Mobiles:
RDO INHIBIT
DSEL PAGE STAT
R D O
I N H I B I T
e
Push
[Digital Button] again to enter the Individual ID se-
lection mode.
• A preset ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
For Handhelds:
For Mobiles:
RDO INHIBIT
INDIVIDUAL1
DSEL PAGE STAT
R D O
I N H I B I T
I N D I V I D U A L 1
r
Push
[CH Up] or [CH Down], or rotate [CH Up/Down] to
select a desired ID (or name).
• Hold down
[Digital Button] for 1 second to cancel and return to
normal operation.
• The ID can be edited with the 10-keypad, depending on the
presetting. (10-key types only) See page 32 for editing details.
