(Replacement page)
Jun. 2012
1 - 2
M
RECEIVER
[FR5000]
[FR5100], [FR5100H]
• Receive system
Double-conversion superheterodyne system
• Intermediate frequencies
1st IF: 46.35 MHz, 2nd IF: 450 kHz
• Sensitivity
Analog
0.3 µV typical at 12 dB SINAD
–10 dBµV maximum at 12 dB SINAD
Digital
0.25 µV typical at 5% BER
0 dBµV emf maximum at 1% BER (PN9)
• Squelch sensitivity (at threshold)
0.25 µV typical
• Adjacent channel selectivity
Wide
80 dB typical (TIA-603-B)
85 dB typical (TIA-603)
86 dB typical
Middle
–
83 dB typical
Narrow
56 dB typical (TIA-603-B)
77 dB typical (TIA-603)
77 dB typical
Digital
66 dB typical (EN 301 166, 400 Hz @1% BER)
63 dB typical (EN 301 166, PN15 @5% BER)
67 dB typical
• Spurious response
Analog
90 dB
80 dB typical
Digital
90 dBµV emf
90 dBµ Vemf typical
• Intermodulation
Wide
78 dB typical
72 dB typical
Middle
–
72 dB typical
Narrow
78 dB typical
71 dB typical
Digital
75 dBµV emf typical
76 dBµV emf typical
• Hum and noise
Wide
52 dB typical
–
Middle
–
–
Narrow
50 dB typical
–
Digital
66 dB typical
–
• Audio output power
(at 5% distortion with a 4
Ω
load)
4.0 W typical
3.5 W minimum
• Audio output impedance
4
Ω
Specifications are measured in accordance with TIA–603–B (for Wide and Narrow) or EN 300 166 (Digital), for FR5000.
Specifications are measured in accordance with EN 300 086 (for Wide, Middle and Narrow) or EN 301 166 (Digital), for FR5100 and FR5100H.
All stated specifications are subject to change without notice or obligation.
