background image

18

7

SET MODE

 Set mode items

Beep Tone function 

 

“bEEP”

Turn the key touch beep sound ON or OFF.

• OFF:  For silent operation.
• ON:  A beep sounds when a key is pushed.

Weather Alert function 

 

“ALrt”

(For USA, EXP, CHN and AUS versions)
When this function is turned ON and the transceiver detects 
a weather alert tone, the “

WX  ” icon blinks and a beep 

sounds. (The blinking stops when another key is pushed.)
The currently selected weather channel is monitored even 
while receiving another channel (when the Power Save 
function is ON) or during a scan.

Priority Scan function 

 

“Prio”

(Not available in the HOL version)
The transceiver has 2 scan types — “Normal” and “Priority.”

• OFF:  A normal scan, which searches all Favorite channels 

in the selected channel group.

• ON:   A priority scan, which sequentially searches all 

Favorite channels while monitoring Channel 16.

Scan resume timer 

 

“S_ti”

(Not available in the HOL version)
Select a scan resume timer option.

• OFF:   When a signal is received, the scan pauses on the 

channel until the signal disappears.

• ON:   When a signal is received, the scan pauses on the 

channel for 5 seconds, and then resumes. 

Push

Key touch beep is ON

(default)

Key touch beep is OFF

Weather alert is OFF

(default)

Weather alert is ON

Push

Push

Normal scan (default*)

Priority scan

*Default value differs, depending on the transceiver version.

Scan resume timer OFF

(default)

Scan resume timer ON

Push

Summary of Contents for IC-M25

















































Reviews: