30
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
1. After a Position Request is being received,
push
to turn OFF the alarm.
•The received call’s information is displayed.
2.
Push the Software Key below the intended
operation.
:
Ignores the call and returns to the
operating screen.
•The call is saved in the DSC Log.
•“ ” blinks continuously until
you display the call message.
:
Holds the RX call task, and
returns to the Main screen.
:
( Able to
Comply)
Sends Acknowledgment “Able to
comply” right away.
•The call is saved in the DSC Log.
•
Displays the Acknowledgment
information, and then returns to
the operating screen by pushing
, and then
.
:
(Unable to
Comply)
Sends an Acknowledgment
“Unable to Comply.”
•The call is saved in the DSC Log.
•
Displays the Acknowledgment
information, and then returns to
the operating screen by pushing
, and then
.
D
Sending a Position Reply call
Send a Position Reply call when a Position Request call is received.
If the Auto ACK function is set to “Auto,” the Acknowledgment is automatically sent to the
