44
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■
DSC Settings
On the “DSC” screen, you can make
settings of the DSC call related items.
[MENU] >
Settings >
DSC
Position Input
See “Entering the position and time” on
Individual ID
See “Entering an Individual ID” on page
Group ID
See “Entering a Group ID” on page 17
for details.
Auto ACK
The Auto ACK function automatically sends
an Acknowledgment when an appropriate
Request is received.
z
Individual ACK
Auto (Able): Automatically sends
“Able to comply.”
Auto (Unable): Automatically sends
“Unable to comply.”
Manual:
Manually sends an
Acknowledgment.
z
Position ACK
Auto (Able): Automatically sends
“Able to comply.”
Manual:
Manually sends an
Acknowledgment.
z
Polling ACK
Auto:
Automatically sends an
Acknowledgment.
Manual:
Manually sends an
Acknowledgment.
z
Test ACK
Auto:
Automatically sends an
Acknowledgment.
Manual:
Manually sends an
Acknowledgment.
CH Auto Switch
Select whether or not to automatically
switch to channel 16 or the specified
channel, or ignore the call.
Accept after 10 sec.:
After receiving a DSC call, the
transceiver remains on the operating
channel for 10 seconds. After that, the
transceiver automatically switches to
the channel that is specified on the DSC
call.
Ignore after 10 sec.:
After receiving a DSC call, if you do
not push
in 10 seconds, the
transceiver ignores the call, and then
remains on the current operating
channel.
Manual:
After receiving a DSC call, you can
select whether or not to accept the
received DSC call.
NOTE:
In the Multiple-task mode, “Ignore”
is renamed to “Hold after 10 sec.”
DSC Data Output
When receiving a DSC call from the
station that is selected in this setting, the
transceiver outputs the DSC data to the
NMEA output port.
L
You can send Distress calls despite of this
setting.
All Stations:
From any station.
Stations List: From the stations that
are entered Individual ID
or Group ID on the Menu
screen.
OFF:
Does not output any DSC
data to an external device.
