30
9
DSC OPERATION
9
10
15
18
13
11
16
14
12
17
1
7
4
2
8
5
3
6
D
Sending a Group call
A Group call enables you to send a DSC call to only a specific group.
L
You can send a Group call to a pre-entered group address, or manually enter the address
1. Push
.
•The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
2. Select “Message Type,” and then push [ENT].
•The “Message Type” screen is displayed.
3. Select “Group,” and then push [ENT].
•The Group call is selected, and returns to the “Compose
Other” screen.
4. Select “Address,” and then push [ENT].
•The “Address” screen is displayed.
5. Select the group to send a Group call, and then push
[ENT].
L
You can also select “Manual Input” to manually enter the
target group.
6. Select “Channel,” and then push [ENT].
7. Select the channel to assign, and then push [ENT].
L
The assigned channels are preset by default.
8. Push
to send the Group call.
•“Transmitting Group Call” is displayed, and then the assigned
channel is automatically selected.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
9.
Hold down [PTT] to communicate.
Summary of Contents for IC-M94DE
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...
