36
9
DSC OPERATION
9
10
15
18
13
11
16
14
12
17
1
7
4
2
8
5
3
6
■
Receiving DSC calls (other)
The transceiver receives the following types of DSC calls.
•Individual calls
•
Individual Acknowledgements (p. 29)
•
•
•
Position Request calls (p. 38)
•
•
L
The receivable call types may differ, depending on the transceiver version or presetting.
By default, the Auto ACK function automatically sends an Acknowledgement to the calling
station. ( [MENU] > Settings > DSC >
Auto ACK
If Auto ACK is set to “Manual,” you can manually send an Acknowledgement for each call
as described in this section.
D
Receiving an Individual call
When an Individual call is received:
•An alarm sounds.
•“RCVD INDV Call” is displayed.
1. Push
to turn OFF the alarm.
2.
Push the Software Key below for your next operation.
:
(Ignore)
Ignores the call and returns to the operating
screen.
•The call is saved in the DSC Log.
•“ ” blinks continuously until you display
the call message.
:
(Hold)
Puts the received call on hold, and returns
to the operating screen.
L
You can check the DSC calls that are on
hold in the Unread List. (p. 41)
:
(Able
Comply)
Sends an Individual Acknowledgement right
away.
•
Automatically switches to the assigned
channel.
•After sending, push
to resend.
•The call is saved in the DSC Log.
:
(Accept)
Accepts the call.
•The call is saved in the DSC Log.
•Displays the received call’s information.
•
Push the Software Key to select the
Acknowledgement option in the “Comply”
item.
Able Comply:
Sends an Acknowledgement without any changes.
Unable Comply:
Sends an Acknowledgement but cannot communicate.
New Channel:
Able to communicate but proposes another channel.
Specify the channel by pushing [▲] or [▼] in the
“Channel” item.
Summary of Contents for IC-M94DE
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...
