10
REPEATER AND DUPLEX OPERATIONS
10-5
If the transmit frequency is out of the amateur band,
the off band indication, “OFF BAND,” is displayed
when you push [PTT] Check the frequency offset or
duplex direction in this case
(p 10-4)
Off band indication
When the operating frequency falls within the
Repeater output frequency range, the Auto Repeater
function automatically sets the Repeater settings
(Duplex ON/OFF, Duplex direction, Tone encoder ON/
OFF) The Auto Repeater function uses the preset
Repeater tone frequency and frequency offset
MENU > Function >
Auto Repeater
1 Push [MENU]
2 Select “Function”
3 Select “Auto Repeater”
4 Select the option to turn ON the Auto Repeater
function
•
OFF:
Turns OFF the function
•
ON (DUP):
Turns ON only the Duplex
operation (Default)
•
ON (DUP, TONE): Turns ON the Duplex
operation and Tone encoder
L
To exit the MENU screen, push [MENU]
Frequency range and offset direction
Frequency range
Shift direction
442000 ~ 444995 MHz
“DUP+” is set
447000 ~ 449995 MHz
“DUP
–
” is set
Auto Repeater function
NOTE for the USA version transceiver:
When turned ON, the Auto Repeater function
has priority over the manual Duplex setting If the
transmit frequency changes after setting, the Auto
Repeater function may have changed the Duplex
setting
[ENT]
[Down]
[Up]
