11
MENU SCREEN
11-28
DV Set items
RX Record (RPT)
(Default: ALL)
MENU > DV Set >
RX Record (RPT)
The transceiver can record the data of up to 50
individual calls� When the received signal includes a
status message (“UR?” or “RPT?”) that is sent back
from the Access repeater, you can record up to 50
messages, or only the last call, in the Received Call
Record�
•
ALL:
Records up to 50 calls�
•
Latest Only: Records only the last call�
[RX>CS] Key
(Default: Call Sign Capture)
MENU > DV Set >
[RX>CS] Key
Select the [RX→CS] Call Sign Capture key operation
when you hold down�
•
Call Sign Capture: While holding down, the RX
History is displayed� After
releasing, the last received call
station’s call sign is set to “TO”
(destination)�
•
RX>CS List:
When you holding down for
1 second, the RX History is
displayed� Rotate [DIAL] to
select a call sign to set to “TO”
(destination), and then push [ENT]�
BK
(Default: OFF)
MENU > DV Set >
BK
The Break-in (BK) function enables you to break
into a conversation, where the 2 other stations are
communicating with the Digital Call Sign Squelch
function�
L
The BK function is automatically turned OFF when
transceiver is turned OFF�
• OFF: Turns OFF the function.
• ON: Turns ON the function.
EMR
(Default: OFF)
MENU > DV Set >
EMR
The Enhanced Monitor Request (EMR) function
enables all transceivers that receive an EMR signal
automatically open their squelch to receive the signal�
L
The EMR function is automatically turned OFF when
transceiver is turned OFF�
• OFF: Turns OFF the function.
• ON: Turns ON the function.
EMR AF Level
(Default: 19)
MENU > DV Set >
EMR AF Level
Set the audio output level to between 0 and 39 for
when an EMR communication signal is received�
When an EMR signal is received, the audio is heard at
this set level, or the [VOL] control level, whichever is
higher�
To disable the setting, set to “0�”
NOTE:
After an EMR signal disappears, the audio
level will remain at the EMR level� In this case,
rotate [VOL] to adjust the audio level�
