28
6
OTHER FUNCTIONS
6
7
10
15
18
8
13
11
16
9
14
12
17
1
4
2
5
3
■
Navigation
The transponder assists you to navigate to a selected destination.
L
The function works only when the transponder is receiving valid GPS signals.
L
The function cannot work while in the MOB mode.
NOTE:
MA-510TR’s Navigation function is a supplemental aid to navigation only, and is
not intended to be a substitute for primary Navigation equipment.
Using [NAV]:
1. Push [NAV].
•The “WAYPOINT” screen is displayed.
2.
Push [▲] or [▼] to select a waypoint.
L
Push [◄] to sort the waypoint data by Name.
L
Push [►] to sort the waypoint data by Range.
3. Push [ENT] to start navigation.
•The AIS and Highway screen is displayed, and the
transponder starts to navigate
.
D
Starting navigation
There are 4 ways of setting a destination, using [NAV], selecting in the AIS list, selecting
in the Waypoint list, and selecting on the plotter display.
Selecting in the Waypoint list:
See “Navigating to a waypoint” on page 24 for details.
Selecting in the AIS list:
1. Open the list screen.
[MENU] > AIS list >
Target/Danger/Friend list
2.
Push [▲] or [▼] to select an AIS target.
3. Push [ENT] to display the Menu window.
•The Menu window is displayed.
4. Select “Navigate to,” and then push [ENT] to start
navigation.
•The AIS and Highway screen is displayed, and the
transponder starts to navigate
.
Summary of Contents for MA-510TR
Page 60: ......
Page 62: ...MEMO ...
Page 63: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO ...
